A quick fix for server admins using teamspeak 3 when guests cant view who in channels:
To join a channel the i_channel_join_power of the server group (found in servergroup/channel/access) must me equal or higher than i_channel_needed_join_power of the channel (found in channelrights/channel/access). To view the members in channels, you have to do the same for i_channel_subscribe_power. Probably this is too low or not set for your members.
You will need to download Teamspeak 2 Client, it should be the top one. Either click Site 1 or Site 2, then agree to the License Agreement by clicking ‘I Agree’ at the bottom.
How do I connect to the server?
This should take about 1 minute to do, dont think its long to set up by the length of this answer.
So, open Teamspeak up (Should be in all programs or a shortcut on your desktop). At the top, click Connection, then click Connect – This will bring up a little panel.
Click the Local Addressbook tab at the top then right click Servers with the little box on the side of it. Then click add server. Label this anything you will remember it by, for example ‘Junglebiscuit Server’.
Click the sever you just added and look on the right, there should be a form.
Time to fill in the form
1 – Label should be already filled in. If not, label it anything you want.
2 – Put the server address in – normally an IP though can also be something like ts.junglebiscuit.com
3 – Tick allow server to assign nickname
4 – Tick Anonymous
5 – Fill in the server password (if required)
How To Fill Out The Teamspeak 2 Connect Screen
The rest of the form can be left blank.
How do I register with the server?
Once you’ve come onto the server, you will be allowed to remain unregistered or on some servers given access to register with the server – This means if the server keeps changing its password, you will be uneffected as you will use your own LOGIN and password, keep reading.
Once youve been given access to register, at the top click Self, then click Register with Server.
Enter your desired name and YOUR OWN password, dont tell anyone your password.
How To Fill Out The Teamspeak 2 Registration Screen
How do I log in with my registered account?
Once youve registered, you will need to modify your connect form.
1 – Tick the Registered button instead of anonymous.
2 – Enter your login name (The one you registered with).
3 – Enter YOUR password.
How To Fill Out The Teamspeak 2 Connect Screen with registered account details
If you have a mic and need to set it up, at the top click Settings, then click Sound Input/Out Settings. Make sure you set it to Push to talk!
Is there an quicker way to connect?
If your to lazy to do the normal connect (That literally takes 2 minutes), you can use the option QUICK CONNECT.
Click Connection > Quick Connect
Server Address : ts.junglebiscuit.com (example)
Nickname : Optional
Login Name : Registered Name
Password : Registered password (NOTE: If youve registered – Enter YOUR pass and not the server pass, this will log you in as REGISTERED.)